Hyundai Tucson: Front Suspension System / Front Stabilizer Bar Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Suspension System / Front Suspension System / Front Stabilizer Bar Repair procedures

Replacement

Remove the front wheel & tire.

Tightening torque :

88.3 ~ 107.9 N.m(9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

Be careful not to damage to the hub bolts when removing the front wheel & tire.

Disconnect the stabilizer link (B) with the front strut assembly (A) after loosening the nut.

Tightening torque :

98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

Remove the sprit pin and castle nut and then disconnect the tie-rod end (A) from the front knuckle.

Tightening torque :

23.5 ~ 33.3 N.m (2.4 ~ 3.4 kgf.m, 17.4 ~ 24.6 lb-ft)

Loosen the bolt & nut and then remove the lower arm (A).

Tightening torque :

98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

5.	Loosen the nut and then remove the dust cover (A).

Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion of the steering gear box.

Tightening torque :

32.4 ~ 37.3 N.m (3.3 ~ 3.8 kgf.m, 23.9 ~ 27.5 lb-ft)

Lock the steering wheel in the straight ahead position to prevent the damage of the clock spring inner cable when you handle the steering wheel.

Loosen the bolt (A) & nut (B) and then remove the roll rod stopper.

Tightening torque :

107.9 ~ 127.5N.m (11.0 ~ 13.0kgf.m, 79.6 ~ 94.0lb-ft)

8.	Disconnect the muffler rubber hanger (A).

Loosen the bolts & nuts and then remove the sub frame.

Tightening torque :

176.5 ~ 196.1N.m (18.0 ~ 20.0kgf.m, 130.2 ~ 144.7lb-ft)

10.

Loosen the bolt & nut and then remove the protactor (A).

Tightening torque :

7.8 ~ 11.8 N.m ( 0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

11.

Loosen the bolt and then remove the stabilizer (A) from the sub frame.

Tightening torque :

44.1 ~ 53.9N.m (4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft)

12.	Installation is the reverse of removal.

Inspection

1.	Check the bushing for wear and deterioration.

2.	Check the front stabilizer bar for deformation.

3.	Check the front stabilizer link ball joint for damage.

Front Lower Arm Repair procedures

Removal 1. Remove the front wheel & tire. Tightening torque : 88.25 ~ 117.68 N.m (9.0 ~ 12.0 kgf.m, 65.1 ~ 86.8 lb-ft) Be careful not to damage to the hub bolts w ...

Front Cross Member Repair procedures

Replacement 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9 N.m(9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) Be careful not to damage to the hub bolts w ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Turn signals and lane change signals
To signal a turn, move the lever up for a right turn or down for a left turn to position (A). The lever will return to the OFF position when the turn is completed. To signal a lane change, move the lever slightly and hold it in position (B). The lever will return to the OFF position when re ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Cylinder Head Components and Components Location
Components 1. Fuel pump adaptor2. Camshaft bearing cap3. Camshaft front bearing cap4. Exhaust camshaft5. Intake camshaft6. Exhaust CVVT assembly7. Intake CVVT assembly8. Cam carrier9. Cylinder head10. Cylinder head gasket11. Retainer lock12. Retainer 13. Valve spring14. Valve stem seal15. Valve ...