Removal |
1. |
Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. |
2. |
Remove the roof trim. (Refer to the Body group- Interior) |
3. |
Disconnect the curtain airbag harness connector. |
4. |
After loosening the mounting bolts and nuts remove the curtain airbag. |
Installation |
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable and wait for at least three minutes. |
3. |
Tighten the curtain airbag mounting bolts.
|
4. |
Connect the curtain airbag connector. |
5. |
Install the roof trim. (Refer to the Body group- Interior) |
6. |
Reconnect the battery negative cable. |
7. |
After installing the curtain airbag (CAB), confirm proper system operation:
|
Hyundai Tucson (LM) 2010-2015 Service Manual: Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve terminals 1 and 2.
Specification: Refer to "Specification"
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
...
Hyundai Tucson (LM) 2010-2015 Service Manual: Body Control Module (BCM) Specifications
Specifications
ItemsSpecificationsRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-30°C ~ 80°C (-4°F ~ 158°F)Dark currentRKE type : 6.0 mASMK type : 5.0 mAGeneral type : 3.0 mA
...