Hyundai Tucson: Seat Belt Pretensioner / Anchor Pretensioner Components and Components Location

Hyundai Tucson (LM) 2010-2015 Service Manual / Restraint / Seat Belt Pretensioner / Anchor Pretensioner Components and Components Location

Components

Anchor Pretensioner Description and Operation
Description Anchor pretensioner operates as well as belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on front seat and it ...

Anchor Pretensioner Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. To remove the seat belt anchor pretensioner (C), keep on pushing the lock pin ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Immobilizer Control Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") 3. Remove the steering column assembly. (Refer to the ST group - "steering column & shaft") 4. Disconnect the 5P connector of the SMARTRA unit an ...

Hyundai Tucson (LM) 2010-2015 Service Manual: A/C Pressure Transducer Description and Operation
Description A/C pressure transducer convert the pressure value of high pressure line into voltage value after measure it. By converted voltage value, engine ECU controls cooling fan by operating it high speed or low speed. Engine ECU stop the operation of compressor when the temperature o ...

© 2010-2024 www.htmanual.net