Inspection |
All units are filled up with coupling fluid (ultra-low
viscosity ATF) prior to shipping. Inspection, fill-up, and replacement
of coupling fluid is therefore not necessary (zero maintenance, lifetime
fluid).
|
Removal |
Coupling Maintenance Precautions
Maintain the coupling at a horizontal level.
|
1. |
Remove the 4WD coupling assembly bolts (A-3ea) mounted to the rear propeller shaft (B).
|
2. |
Using a flat tool, separate the propellar shaft from 4WD coupling assembly. |
3. |
Disconnect the pressure sensor connector (A) and Oil hydraulic Motor connector (B). |
4. |
Loosen the coupling assembly mounting bolts (A-4ea).
|
5. |
Using a flat tool, separate the 4WD coupling assembly from the rear differential carrier assembly. |
Installation |
1. |
Install in the reverse order of removal.
|
2. |
After replacing the coupling, reset the 4WD ECU's clutch learing using the GDS tool.
(Refer to 4WD Control System - "Adjustment") |
Hyundai Tucson (LM) 2010-2015 Service Manual: Body Side Moldings Repair procedures
Replacement
Roof Rack Replacement
•
When prying with a flat-tipped screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damaged.
•
Put on gloves to protect your hands.
•
Take care not to scratch ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Description and Operation
Description
The ECM (Electro Chromatic inside rear view Mirror) is for
dimming the reflecting light from a vehicle behind at night, in order
the user not to be dazzled by the light. The forward facing sensor
detects brightness of the surroundings, while the rearward looking
sensor the str ...