Hyundai Tucson: Manual Transaxle Control System / Control Shaft Assembly Repair procedures

Removal
1.
Remove the following items;
A.
Air cleaner assembly and air duct.
(Refer to "Intake and Exhaust system" in EM group.)
B.
Battery and battery tray.
(Refer to "Charging system" in EE group.)
   
Set room side Shift lever to N position before remove the control shaft assembly.
2.
Separate the cable (A) from the control shaft after remove the pin (B) and washer (C).

3.
Remove the control shaft assembly after loosen the bolts.

Installation
1.
Installation is the reverse of removal.
   
When installing, set control shaft lever to neutral position.
When installing, apply the sealant as shown in the illustration.

Specified sealant : MS 721-40 or MS721-38

2.
After installling, check to be sure that this part operates as designed at each range of T/M side corresponding to each position of shift lever.
Control Shaft Assembly Description and Operation
Description Control shaft assembly is mounted on the top of the manual transmission, and select & shift cable are equipped. Control shaft assembly is operated by shifting the shift lever. ...

Automatic Transaxle System
...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Spark Plug Repair procedures
Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. 3. Check the spark plug visually. If the electrode is dry, the spark plug is normal. If the electrode is wet, check the damage and electrode gap as below. [ ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Description and Operation
Description The immobilizer system will disable the vehicle unless the proper ignition key is used, in addition to the currently available anti-theft systems such as car alarms, the immobilizer system aims to drastically reduce the rate of auto theft. 1. Encrypted SMARTRA type immobilizer ...

© 2010-2024 www.htmanual.net