Hyundai Tucson: Lubrication System / Oil Pressure Switch Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Mechanical System / Lubrication System / Oil Pressure Switch Repair procedures

Inspection

1.	Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch.

2.	Check the continuity between the terminal and the body when the fine wire is pushed. If there is continuity even when the fine wire is pushed, replace the switch.

3.	If there is no continuity when a 50 kPa (0.50 kgf/cmx, 7.25 psi) is applied through the oil hole, the switch is operaing properly. Check for air leakage. If air leaks, the diaphragm is broken. Replace it.

Oil Pan Repair procedures

Removal 1. Remove the under covers. (Refer to Engine and transaxle assembly) 2. Drain engine oil. 3. Remove the oil pan (A). (1) Unfasten the bolts. (2) Insert the blade of SST (0921 ...

Oil level sensor Repair procedures

Removal and Installation [For Europe] When the oil sensor signal fault occurs, refer to the DTC guide. 1. Drain the engine oil. 2. Remove the oil level sensor (A) after disconnecting the o ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's Pre-Tensioner Seat Belts. The purpose of the pretensioner is to make sure the seat belts fit tightly against the occupant's body in certain frontal collisions. The pre-tensioner seat belts may be activated in crashes where the fronta ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Basic Mode Screen
1. Mode Display Displays currently operating mode. 2. Channel Information Displays the category, channel number, channel name, artist and title information. 3. Preset Displays currently playing preset number [1] ~ [6]. 4. Preset Display Displays saved presets. Using Seek Press the key to ...