Adjustment |
1. |
Driving the vehicle in a circle at less than 8km/h 3 times or until the compass heading appears. |
2. |
Driving in a circle in right-handed direction and opposite
direction are possible, and if the calibration is completed, the compass
heading will appear. |
3. |
Keep driving in a circle until a commpass heading appears. |
1. |
Determine the desired zone number based upon your current location on the zone maps. |
2. |
Press and hold the Feature Control button for more than 6 but
less than 9 seconds, the current zone number will appear on the display
(B). |
3. |
Pressing and holding the feature control button (A) again
will cause the numbers to increment (Note: they will repeat …13, 14,
15, 1, 2,..). Releasing the button when the desired zone number appears
on the display will set the new zone. |
4. |
Within about 5 seconds the compass will start displaying a compass heading again. |
1. |
Press and hold the feature control button (A) for more than 9
seconds. When the compass memory is cleared, a "C" will appear in the
display (B). |
2. |
To calibrate the compass, drive the vehicle is 2 complete circles at less than 8 KPH (5 MPH). |
Hyundai Tucson (LM) 2010-2015 Owners Manual: Phone
Before using the Bluetooth® Wireless Technology phone features
In order to use Bluetooth® Wireless Technology phone, you must first pair
and connect the Bluetooth® Wireless Technology mobile phone.
If the mobile phone is not paired or connected, it is not possible to enter
Phone mode. ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Snow tires
If you equip your car with snow tires, they should be the same size and have
the same load capacity as the original tires. Snow tires should be installed on
all four wheels; otherwise, poor handling may result. Snow tires should carry 4
psi (28 kPa) more air pressure than the pressure recommen ...