Hyundai Tucson: Engine Control System / Canister Close Valve (CCV) Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Control / Fuel System / Engine Control System / Canister Close Valve (CCV) Description and Operation

Description
Canister Close Valve (CCV) is normally open and is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere during EVAP leak detection process.

Fuel Pressure Control Valve Repair procedures
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fuel ...

Canister Close Valve (CCV) Specifications
Specification ItemSpecificationCoil Resistance (x)19.8 ~ 21.8 [20°C(68°F) ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: 26 Brake Control Solenoid Valve(26/B_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the resistance is within the specification. Removal     Replacing an on/off soleno ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Rear Door Components and Components Location
Components 1. Door inside handle housing 2. Door trim3. Door belt inner weatherstrip4. Door screen5. Door module6. Door panel7. Door delta inner cover8. Door belt outside weatherstrip9. Door delta molding cover10. Door side weatherstrip11. Body side weatherstrip12. Door hinge ...

© 2010-2024 www.htmanual.net