Hyundai Tucson: Hydraulic System / Valve Body Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Automatic Transaxle System / Hydraulic System / Valve Body Description and Operation

Description

The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump.

Specifically, these valves consist of pressure regulator valves, oil redirection valves, shift valves, and manual valves.

The body also features electronic solenoid valves that ensure smooth gear changes.

Fluid Repair procedures

Service Adjustment Procedure Oil level Check A check of ATF level is not normally required during scheduled services. If an oil leak is found, perform the oil level chec ...

Valve Body Components and Components Location

Components Location 1. PCV adjust screw2. Solenoid valve3. Oil temperature sensor4. Accumulator5. Under drive brake (UD/B) pressure flow hole6. Low & reverse brake (LR/B) pressure flow hole ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Dynamic Damper Repair procedures
Removal 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refer to Driveshaft Assembly - “TJ Joint”) 3. Remove the remove the both side of band (B) of the dynamic damper (A). 4. Fix the driveshaft (A) wit ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Special Service Tools
Special Service Tools Tools (Number and name)IllustrationUse09200-3N000Engine support fixture(Beam)Removal and installation of the transaxle.Use this beam (SST No. : 09200-38001/09200-3N000) with the supporter (SST No. : 09200-2S000).09200-2S000Engine support fixture(Adapter)Removal and install ...