Hyundai Tucson: Automatic Transaxle Control System / Output Speed Sensor Description and Operation

Description
The Output Speed Sensor is a vital unit that measures the rate of rotation of the transmission's turbine shaft and output shaft, and delivers the readings to the TCM.
The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.

Input Speed Sensor Repair procedures
Inspection 1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. Removal 1. Remove the valve body assembly. (R ...

Output Speed Sensor Specifications
Specifications x Type: Hall effect sensor Operation condition (°C)°F(-40~150) -40~302Air gap (mm)in.(0.25~0.70) 0.0098~0.0276Output voltage (V)High1.18 ~ 1.68Low0.59 ~ 0.84 ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Additional safety precautions
Passengers should not move out of or change seats while the vehicle is moving. A passenger who is not wearing a seat belt during a crash or emergency stop can be thrown against the inside of the vehicle, against other occupants, or be ejected from the vehicle. Do not use any accessories on se ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Passenger Airbag (PAB) Module Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. (Refer to the Body group- crash pad). 3. Disconnect the passenger airbag connector and remove the PAB mounting bolt. 4. Remove the crash pad. ( ...

© 2010-2024 www.htmanual.net