Inspection |
1. |
Disconnect the back up lamp switch connector (A). |
2. |
Check the continuity between no. 1 and 2 terminals of backup
lamp switch. When the shift lever is in reverse, there should be
continuity. |
3. |
If necessary, repair or replace the backup lamp switch. |
Replacement |
1. |
Disconnect the back up lamp switch connector (A). |
2. |
Remove the back up lamp switch (A). |
3. |
Replace a new one and install the back up lamp switch.
|
Hyundai Tucson (LM) 2010-2015 Owners Manual: Turn by Turn
The Turn by Turn feature can be used through Blue Link®.
1. Direction Indicator Image
2. Remaining distance until next point
3. The Count bar is divided into a total of 9 levels.
4. Next Street name
5. Distance to destination
6. Expected Time Arrival
7. Current Street name
❈ For infor ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Anchor Pretensioner Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
To remove the seat belt anchor pretensioner (C), keep on
pushing the lock pins (A) as arrow direction. And then remove the seat
belt after pushing the lock pin (B).
3.
Rem ...