Hyundai Tucson: SRSCM / Seat Belt Buckle Switch (BS) Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Description and Operation

Description

The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return. The buckle status shall modify the SRSCM deployment. If the buckle status is unbuckled, the corresponding pretensioner will not be deactivated.

Side Impact Sensor (SIS) Repair procedures

Removal Pressure Side Impact Sensor • Removal of the airbag must be performed according to the precautions/procedures described previously. • Before disconnect ...

Seat Belt Buckle Switch (BS) Components and Components Location

Components ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Specifications
Specifications ItemsSpecificationsClutch operation methodHydraulic typeClutch cover TypeDiaphragm spring strapClutch disc Type TypeSingle dry with diaphragmFacing diameterO235 x O155 mm ( O9.2520 x O6.1025 in.)(Outer x inner)Clutch release cylinderinner diameter20.64 mm (0.8126 ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Description and Operation
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp check. The lamp shall turn on for 6 seconds during the initialization phase and be turned off afterw ...