Hyundai Tucson: Audio / AUX(Auxiliary) Jack Repair procedures

Removal
1.
Remove the floor console upper cover (A) using the appropriate tool.

2.
Remove the seat heater switch module (A).

   
Take care not to damage the hook when removing the switch.
3.
Disconnect the connectors (A) from the seat heater switch module.

4.
Remove the Multimedia Jack (A) from the seat heater switch module after pressing the hooks.

Installation
1.
Install the multimedia jack.
2.
Connect the AUX jack connector.
3.
Install the center console.
4.
Install the console upper cover.
5.
Install the shift lever knob.
   
Make sure the Aux connector and the console connectors are plugged in properly.
AUX(Auxiliary) Jack Description and Operation
Description The AUX, iPod and USB JACK on the center console is for customers who like to listen to external portable music players like the MP3, iPod, earphone, USB memory stick, CD player and ...

Multifunction switch
...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Oil level sensor Repair procedures
Removal and Installation [For Europe] When the oil sensor signal fault occurs, refer to the DTC guide. 1. Drain the engine oil. 2. Remove the oil level sensor (A) after disconnecting the oil level sensor connector. Tightening torque: 8.8 ~ 9.8N.m (0.9 ~ 1.0kgf.m, 6.5 ~ 7.2lb-ft) ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Clutch Release Cylinder Repair procedures
Removal 1. Drain the brake fluid through the bleed plug (A). 2. Remove the clutch release cylinder assembly (C) after removing thd tube (B) and bolts (A-2ea). Installation 1. Installation is the reverse of removal.     Coat the clutch clevis push rod specified grea ...

В© 2010-2026 www.htmanual.net