Hyundai Tucson: Tires and wheels / Low aspect ratio tires

Low aspect ratio tires, the aspect ratio is lower than 50, are provided for sporty looks.

Because low aspect ratio tires are optimized for handling and braking, it may be more uncomfortable to ride in and there is more noise compare with normal tires.

CAUTION

Because the sidewall of the low aspect ratio tire is shorter than the normal, the wheel and tire of the low aspect ratio tire is easier to be damaged. So, follow the instructions below. When driving on a rough road or off road, drive cautiously because tires and wheels may be damaged. And after driving, inspect tires and wheels. When passing over a pothole, speed bump, manhole, or curb stone, drive slowly so that the tires and wheels are not damaged. If the tire is impacted, we recommend that you inspect the tire condition or contact an authorized HYUNDAI dealer. To prevent damage to the tire, inspect the tire condition and pressure every 1,864 miles (3,000km).

CAUTION

Radial-ply tires
Radial-ply tires provide improved tread life, road hazard resistance and smoother high speed ride. The radial- ply tires used on this vehicle are of belted construction, and are selected to comple ...

Fuses
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, the other in the ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Description and Operation
Description The SMART KEY system is a system that allows the user to access and operate a vehicle in a very convenient way. To access the vehicle, no traditional key or remote control unit is needed. The user carries a SMART KEY FOB which does not require any conscious actions by the user ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: High mounted stop light
1. Open the tailgate. 2. Gently remove the center cover of the rear tailgate trim. 3. Disconnect the electrical connector. 4. Loosen the retaining nuts and remove the spoiler. 5. Remove the high mounted stop light assembly (A) after loosening the nuts and washer nozzle (B). 6. Reinstall a ...

© 2010-2026 www.htmanual.net