Hyundai Tucson: Tires and wheels / Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. To reduce the possibility of losing control, slow down whenever there is rain, snow or ice on the road.
Wheel replacement
When replacing the metal wheels for any reason, make sure the
new wheels are equivalent to the original factory units in diameter, rim width and
offset. ...
Tire maintenance
In addition to proper inflation, correct wheel alignment helps
to decrease tire wear. If you find a tire is worn unevenly, have your dealer check
the wheel alignment.
When you have new tires inst ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Starter Repair procedures
Removal
1.
Disconnect the battery negative terminal.
2.
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
3.
Disconnect the starter cable (A) from the B terminal on the solenoid then disconnect the connector from the S terminal (B).
4. ...
Hyundai Tucson (LM) 2010-2015 Service Manual: 26 Brake Control Solenoid Valve(26/B_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the resistance is within the specification.
Removal
Replacing an on/off soleno ...
