Hyundai Tucson: Driving your vehicle / Trailer towing

If you are considering to tow with your vehicle, you should first check with your state's Department of Motor Vehicles to determine legal requirements. Since laws vary from state to state the requirements for towing trailers, vehicles, or other types of vehicles or apparatus may differ. Ask an authorized HYUNDAI dealer for further details before towing.

Remember that trailering is different than just driving your vehicle by itself. Trailering means changes in handling, durability, and fuel economy.

Successful, safe trailering requires correct equipment, and it has to be used properly. Damage to your vehicle caused by improper trailer towing is not covered by your vehicle manufacturer’s warranty.

This section contains many timetested, important trailering tips and safety rules. Many of these are important for your safety and that of your passengers. Please read this section carefully before you pull a trailer.

WARNING

Take the following precautions:

Tire chains
Since the sidewalls of radial tires are thinner than other types of tires, they may be damaged by mounting some types of tire chains on them. Therefore, the use of snow tires is recommended ins ...

If you decide to pull a trailer?
Here are some important points if you decide to pull a trailer: Consider using a sway control.You can ask a trailer hitch dealer about sway control. Do not do any towing with your vehicle dur ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Phone Menu Screen
Phone Menus With a Bluetooth® Wireless Technology device connected, press the key to display the Phone menu screen. 1) Favorite : Up to 20 frequently used contacts saved for easy access 2) Call History : Displays call history list screen 3) Contacts : Displays the Contacts list 4) Setup : ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
Removal 1. Remove the liftgate trim in the trunk after removing the screws and clips. (Refer to the BD group - "Liftgate") 2. Remove the liftgate garnish (A) after disconnecting the connector and removing the nuts. 3. Remove the back view camera (A) after loosening the screws (2EA). ...

© 2010-2024 www.htmanual.net