Hyundai Tucson: Normal maintenance schedule / 90,000 miles (144,000 km) or 72 months
- Rotating tires
- Inspect vacuum hose
- Inspect air conditioning refrigerant
- Inspect brake hoses and lines
- Inspect drive shafts and boots
- Inspect exhaust pipe and muffler
- Inspect front brake disc/pads, calipers
- Inspect propeller shaft (AWD)
- Inspect rear brake disc/pads
- Inspect steering gear box, linkage & boots/lower arm ball joint, upper arm
ball joint
- Inspect suspension mounting bolts
- Inspect brake fluid
- Inspect fuel filter *2
- Inspect fuel lines, fuel hoses and connections
- Inspect fuel tank air filter *2
- Inspect parking brake
- Inspect vapor hose and fuel filler cap, fuel tank
- Inspect drive belts (First, 60,000 miles (96,000 km) or 72 months after
every 15,000 miles (24,000 km) or 24 months) *5
- Replace climate control air filter (for evaporator and blower unit)
- Replace air cleaner filter
- Replace engine oil and filter (90,000 miles (144,000 km) or 144 months)
- Add fuel additive *1 (90,000 miles (144,000 km) or 144 months)
Rotating tires
Inspect air cleaner filter
Inspect vacuum hose
Replace engine oil and filter (82,500 miles (132,000 km) or 132 months)
Add fuel additive *1 (82,500 miles (132,000 km) or 132 ...
Rotating tires
Inspect air cleaner filter
Inspect vacuum hose
Replace engine oil and filter (97,500 miles (156,000 km) or 156 months)
Add fuel additive *1 (97,500 miles (156,000 km) or 156 ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Child restraint system
WARNING
Always properly restrain children in the rear seats of the vehicle. Children
of all ages are safer when restrained in the rear seat. A child riding in the front
passenger seat can be forcefully struck by an inflating air bag resulting in SERIOUS
INJURY or DEATH.
Children under age 13 ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test
1.
Check for DTCs.
•
If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC. (Refer to DTC guide)
2.
Check if sparks occur.
(1)
Remove the engi ...