Hyundai Tucson: Manual Transaxle System / Back-up Lamp Switch Specifications

Back-up Lamp Switch Description and Operation

Description Back up lamp switch is pushed by the reverse lug sliding when select arm, and switches the back up lamp. ...

Back-up Lamp Switch Repair procedures

Inspection 1. Disconnect the back up lamp switch connector (A). 2. Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Battery Sensor Repair procedures
Removal 1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. Remove the battery negative (-) cable after removing the bolt (B). Installation 1. Install in the reverse order of removal. Battery sensor cable installation bolt: 21.6 ~ 32 ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Photo Sensor Repair procedures
Inspection 1. Ignition "ON" 2. Using the scan tool. 3. Emit intensive light toward photo sensor using a lamp, and check the output voltage change. 4. The voltage will rise with higher intensive light and reduce with lower intensive light. 1. Sensor Ground2. 5V (Vcc)3. Photo Sensor ...