Hyundai Tucson: Exterior care / Finish damage repair
Deep scratches or stone chips in the painted surface must be repaired promptly. Exposed metal will quickly rust and may develop into a major repair expense.
✽ NOTICE
If your vehicle is damaged and requires any metal repair or replacement, be sure the body shop applies anti-corrosion materials to the parts repaired or replaced.
Finish maintenance
Washing
To help protect your vehicle’s finish from rust and deterioration, wash it thoroughly
and frequently at least once a month with lukewarm or cold water.
If you use your vehicle for off-ro ...
Bright-metal maintenance
To remove road tar and insects, use a tar remover, not a scraper or other
sharp object.
To protect the surfaces of brightmetal parts from corrosion, apply a coating
of wax or chrome preserv ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
Inspection
1.
Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.
2.
Check for continuity between the terminals.
3.
If continuity is not specified, replace the switch.
Removal
1.
Disconnect the negative (-) battery termin ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Power Window Switch Repair procedures
Inspection
Main Power Window Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim and power window switch.
(Refer to the BD group - "Front door")
3.
Check for continuity between the terminals in each switch
position according to the table. ...
