Hyundai Tucson: Steering wheel / Flex Steer Description and Operation

Instruction
Flex Steer is system to choose the three modes power steering depending on driver preference or driving conditions.
   
Display on the cluster but power steering is would not changed while operating the steering wheel.
As a safety measures, mode is changed automatically when steering wheel operation is done.
Be sure to carefully change the mode while driving.
Electric Power Steering (MDPS) is not working due to the failure, "flex steer" is may not work.
How to operate
First input : Display the current mode on cluster. (4 seconds)
Add input (4 seconds) : Mode is changed sequentially.

Three steering modes
COMRORT : For the elder and the female drivers: it is mainly used for city driving and stop & parking, and a little lighter power steering.
NORMAL : Basic mode
SPORT : It is mainly used for highway driving, and a little heavy power steering.
Flex Steer Components and Components Location
Components Location 1. Flex Steering Switch ...

Flex Steer Schematic Diagrams
Part Circuit Diagram ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Special Service Tools
Special Service Tools Tool (Number and Name)IIIustrationUse09568-34000 Ball joint remover09546-26000 Strut spring compressorCompression of coil spring09568-4R100Lower arm ball joint removerRemoval of front lower arm from front axle ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: In case of an emergency while driving
If the engine stalls while driving Reduce your speed gradually, keeping a straight line. Move cautiously off the road to a safe place. Turn on your hazard warning flasher. Try to start the engine again. If your vehicle will not start, contact an authorized HYUNDAI dealer or seek other ...

© 2010-2025 www.htmanual.net