Hyundai Tucson: Multifunction switch / Specifications

Hyundai Tucson (LM) 2010-2015 Service Manual / Body Electrical System / Multifunction switch / Specifications

Specifications

Items		Specifications
Rated voltage		DC 12V
Operating temperature range		-22 ~ +176°F (-30°C ~ +80°C)
Rated load	Dimmer & passing switch	High : 0.2A (Relay load) Low : 0.2A (Relay load) Passing : 0.2A (Relay load)
	Lighting switch	Lighting : 0.2A (Relay load)
	Turn signal switch	6.6 ± 0.5A (Lamp load)
	Wiper & mist switch	Low, High : 4.5A (Motor load) Intermittent : 0.22 ± 0.05A (Relay load) Lock : Max. 28A (Motor load) Mist : 4.0A (Motor load) Washer : 4.0A (Motor load)
	Front fog lamp switch	0.2A (Relay load)
	Rear wiper & washer	Wiper : 1.0A (Relay load) Washer : 4.0A (Motor load)

Multifunction switch

...

Components and Components Location

Component (1) 1. Steering column shaft2. Lighting switch3. Wiper and washer switch4. Screw5. Clock spring Component (2) ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Battery
Jump starting can be dangerous if done incorrectly. Follow the jump starting procedure in this section to avoid serious injury or damage to your vehicle. If in doubt about how to properly jump start your vehicle, we strongly recommend that you have a service technician or towing service do it ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Instrument Cluster Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the cluster fascia panel (A). [LHD] [RHD] 3. Remove the cluster fascia lower panel (A). [LHD] [RHD] 4. Remove the cluster fascia (A) from the housing after loosening 4 screws. [LHD] [RHD] 5. Disconnect the ...