Hyundai Tucson: Multifunction switch / Components and Components Location

Component (1)

1. Steering column shaft
2. Lighting switch
3. Wiper and washer switch
4. Screw
5. Clock spring

Component (2)

Specifications
Specifications ItemsSpecificationsRated voltageDC 12VOperating temperature range -22 ~ +176°F (-30°C ~ +80°C)Rated loadDimmer & passingswitchHigh : 0.2A (Relay load)Low : 0.2A (Relay load) ...

Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds (A) after removing 3 screws. [LHD] [RHD]     Take care not t ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Light bulbs
Consult an authorized HYUNDAI dealer to replace most vehicle light bulbs. It is difficult to replace vehicle light bulbs because other parts of the vehicle must be removed before you can get to the bulb. This is especially true for removing the headlight assembly to get to the bulb(s). Removi ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Knock Sensor (KS) Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold. (Refer to Engine Mechanical System - “Intake And Exhaust System”) 3. Disconnect the knock sensor connector (A). 4. Remove the installation bolt (B), and then r ...

© 2010-2020 www.htmanual.net