Hyundai Tucson: General Information / Specifications
| Specifications |
| Item | Specification | |
| Type | Electric Power Steering System | |
| Steering gear | Type | Rack & Pinion |
| Rack stroke | 153mm (6.02 in.) ± 1 (0.3937 in) | |
| Steering angle(Max.) | Inner | 39.4°±1.30` |
| Outer | 31.9° | |
| Item | Tightening torque (kgf.m) | ||
| Nm | Kgf.m | lb-ft | |
| Hub nuts | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
| Steering wheel lock nut | 39.2 ~ 49.0 | 4.0 ~ 5.0 | 28.9 ~ 36.2 |
| Steering column mounting bolts and nuts | 12.7 ~ 17.7 | 1.3 ~ 1.8 | 9.4 ~ 13.0 |
| Universal joint to pinion of steering gear | 32.4 ~ 37.3 | 3.3 ~ 3.8 | 23.8 ~ 27.5 |
| Tie rod end castle nut | 23.5 ~ 33.3 | 2.4 ~ 3.4 | 17.4 ~ 24.6 |
| Lower arm ball joint bolts | 98.1 ~ 117.7 | 10.0 ~ 12.0 | 72.3 ~ 86.8 |
| Steering gear box mounting bolts | 58.8 ~ 78.5 | 6.0 ~ 8.0 | 43.4 ~ 57.9 |
| Stabilizer link nut | 98.1 ~ 117.7 | 10.0 ~ 12.0 | 72.3 ~ 86.8 |
| Sub frame stay mounting bolts & nuts | 44.1 ~ 58.8 | 4.5 ~ 6.0 | 32.5 ~ 43.4 |
| Sub frame mounting bolts & nuts | 176.5~ 196.1 | 18.0 ~ 20.0 | 130.2 ~ 144.7 |
| Roll rod mounting bolt & nut | 107.9 ~ 127.5 | 11.0 ~13.0 | 79.6 ~ 94.0 |
Special Service Tools
Special Service Tools
Tool (Number and Name)IIIustrationUse09568-34000Ball joint remover
...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the resistance is within the specification.
Removal
Replacing an on/off soleno ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
Refrigerant System Service Basics
Refrigerant Recovery
Use only service equipment that is U.L-listed and is
certified to meet the requirements of SAE J2210 to remove
HFC-134a(R-134a) from the air conditioning system.
-
Air conditioning refrigerant or lubricant vapor ...
