Vehicle Stability Management (VSM) helps ensure the vehicle stays stable when accelerating or braking suddenly on wet, slippery and rough roads where traction over the four tires can suddenly become uneven.
WARNING
Take the following precautions when using the Vehicle Stability Management (VSM):
VSM operation
VSM ON condition
The VSM operates when:
When operating
When you apply your brakes under conditions which may activate the ESC, you may hear sounds from the brakes, or feel a corresponding sensation in the brake pedal. This is normal and it means your VSM is active.
✽ NOTICE
The VSM does not operate when:
VSM OFF condition
To cancel VSM operation, press the ESC OFF button. ESC OFF indicator light ( ) will illuminate.
To turn on VSM, press the ESC OFF button again. The ESC OFF indicator light will go out.
WARNING
If ESC indicator light ( ) or EPS warning light ( ) stays on, your vehicle may have a malfunction with the VSM system. When the warning light illuminates, have your vehicle checked by an authorized HYUNDAI dealer as soon as possible.
CAUTION
Driving with varying tire or wheel sizes may cause the ESC system to malfunction. When replacing tires, make sure they are the same size as your original tires for this vehicle.
Hyundai Tucson (LM) 2010-2015 Owners Manual: To increase cruise control speed
Push the lever (1) up (to RES+) and hold it, while monitoring the SET speed
on the instrument cluster. Release the lever when the desired speed is shown
and the vehicle will accelerate to that speed.
Push the lever (1) up (to RES+) and release it immediately. The cruising
speed wil ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 2 and 5 [B1/S1].
4.
Measure resistance between the HO2S terminals 3 and 4 [B1/S2].
5.
Check that the resistance is within the specification.
Specifica ...