Hyundai Tucson: Normal maintenance schedule / 120,000 miles (192,000 km) or 96 months
- Rotating tires
- Inspect vacuum hose
- Inspect air conditioning refrigerant
- Inspect brake hoses and lines
- Inspect drive shafts and boots
- Inspect exhaust pipe and muffler
- Inspect front brake disc/pads, calipers
- Inspect propeller shaft (AWD)
- Inspect rear brake disc/pads
- Inspect steering gear box, linkage & boots/lower arm ball joint, upper arm
ball joint
- Inspect suspension mounting bolts
- Inspect brake fluid
- Inspect fuel filter *2
- Inspect fuel lines, fuel hoses and connections
- Inspect fuel tank air filter *2
- Inspect parking brake
- Inspect vapor hose and fuel filler cap, fuel tank
- Inspect valve clearance (for Theta 2.4) *4
- Inspect drive belts (First, 60,000 miles (96,000 km) or 72 months after
every 15,000 miles (24,000 km) or 24 months) *5
- Replace climate control air filter (for evaporator and blower unit)
- Replace air cleaner filter
- Replace engine oil and filter (120,000 miles (192,000 km) or 192 months)
- Replace coolant (First, 120,000 miles (192,000 km) or 120 months after every
30,000 miles (48,000 km) or 24 months)
- Add fuel additive *1 (120,000 miles (192,000 km) or 192 months)
Rotating tires
Inspect air cleaner filter
Inspect vacuum hose
Inspect rear axle oil (AWD) *3
Inspect transfer case oil (AWD) *3
Replace engine oil and filter (112,500 miles (180,000 km) o ...
Rotating tires
Inspect air cleaner filter
Inspect vacuum hose
Replace engine oil and filter (127,500 miles (204,000 km) or 204 months)
Add fuel additive *1 (127,500 miles (204,000 km) or 20 ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Sound Settings
Sound Settings
Press the key
Select [Sound]
Select [Sound Setting]
Use the ,
,
,
buttons to adjust the Fader/Balance
settings.
Use the ,
buttons to adjust the Bass/Middle/Treble
settings.
Press the button to reset.
SDVC (Speed Dependent Volume Control)
Press th ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Front Fog Lamps Repair procedures
Inspection
Front Fog Lamp Switch
1.
With the fog lamp switch in each position, make sure that
continuity exists between the terminals below. If continuity is not as
specified, replace the multifunction switch.
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the f ...