Hyundai Tucson: Power windows / Auto up/down window
Pressing or pulling up the power window switch momentarily to the second detent position (6) completely lowers or raises the window even when the switch is released. To stop the window at the desired position while the window is in operation, pull up or press down and release the switch.
Window opening and closing
To open:
Press the window switch down to the first detent position (5). Release the switch
when you want the window to stop.
To close:
Pull the window switch up to the first detent position (5) ...
To reset the power windows
If the power windows do not operate normally, the automatic power window system
must be reset as follows:
1. Place the ignition switch to the ON position.
2. Close the windows and continue pulling ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Variable Intake Solenoid (VIS) Valve Description and Operation
Description
Variable Intake manifold Solenoid (VIS) valve is installed on
the intake manifold. The VIS valve controls the vacuum modulator which
activates a valve in the intake manifold. The ECM opens or closes this
valve according to engine condition (Refer to below table).
Engine condi ...
Hyundai Tucson (LM) 2010-2015 Service Manual: External Amplifier Repair procedures
Removal
External Amplifier
1.
Remove the rear right luggage side trim.
(Refer to Body - "Interior Trim")
2.
Remove the external amplifier (B) after disconnecting the connectors (A) and loosening the mounting nuts.
Installation
External Amplifier
1.
Install the external amplifier afte ...
