Hyundai Tucson: Before driving / Before starting

WARNING

To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions:

WARNING

NEVER drink or take drugs and drive. Drinking or taking drugs and driving is dangerous and may result in an accident and SERIOUS INJURY or DEATH.

Drunk driving is the number one contributor to the highway death toll each year. Even a small amount of alcohol will affect your reflexes, perceptions and judgment. Just one drink can reduce your ability to respond to changing conditions and emergencies and your reaction time gets worse with each additional drink.

Driving while under the influence of drugs is as dangerous or more dangerous than driving under the influence of alcohol.

You are much more likely to have a serious accident if you drink or take drugs and drive. If you are drinking or taking drugs, don’t drive. Do not ride with a driver who has been drinking or taking drugs. Choose a designated driver or call a taxi.

Before entering the vehicle
Be sure all windows, outside mirror(s), and outside lights are clean and unobstructed. Remove frost, snow, or ice. Visually check the tires for uneven wear and damage. Check under the vehi ...

Ignition switch
WARNING To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions: NEVER allow children or any person who is unfamiliar with the vehicle to touch the ignition switch or rel ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Engine Start/Stop button
Whenever the front door is opened, the Engine Start/Stop button will illuminate and will go off 30 seconds after the door is closed. WARNING To turn the engine off in an emergency: Press and hold the Engine Start/Stop button for more than two seconds OR Rapidly press and release the Engin ...

Hyundai Tucson (LM) 2010-2015 Service Manual: CVVT (Continuously Variable Valve Timing) System Description and Operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load. By controlling CVVT, the valve over-lap or under-lap occurs, which m ...

© 2010-2026 www.htmanual.net