Hyundai Tucson: BCM (Body Control Module) / Body Control Module (BCM) Specifications
| Specifications |
| Items | Specifications |
| Rated voltage | DC 12V |
| Operating voltage | DC 9 ~ 16V |
| Operating temperature | -30°C ~ 80°C (-4°F ~ 158°F) |
| Dark current | RKE type : 6.0 mA |
| SMK type : 5.0 mA | |
| General type : 3.0 mA |
Body Control Module (BCM) Components and Components Location
Components
Connector Pin Information
NoConnector AConnector BConnector CConnector D1B+LIN (RPAS)Safety power window Enable lowRear seat heater relay2IGN 1Head lamp low switchSecurity INDRear fog ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme
caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are being made or when the vehicle
is stopped near the edge of a roadway.
To turn the hazard warni ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Fuel Tank Pressure Sensor (FTPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification: Refer to "Specification"
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the rear seat.
(Refer to Body ...
