Hyundai Tucson: Body Electrical System / BCM (Body Control Module)
- Body Control Module (BCM) Specifications
- Body Control Module (BCM) Components and Components Location
- Body Control Module (BCM) Schematic Diagrams
- Body Control Module (BCM) Description and Operation
- Body Control Module (BCM) Repair procedures
Transmitter Repair procedures
Inspection
1.
Check that the red light flickers when the door lock or unlock button is pressed on the transmitter.
2.
Remove the battery and check voltage if the red light doesn't flicker.
...
Body Control Module (BCM) Specifications
Specifications
ItemsSpecificationsRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-30°C ~ 80°C (-4°F ~ 158°F)Dark currentRKE type : 6.0 mASMK type : 5.0 mAGeneral type : 3. ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Body Side Moldings Repair procedures
Replacement
Roof Rack Replacement
•
When prying with a flat-tipped screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damaged.
•
Put on gloves to protect your hands.
•
Take care not to scratch ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Inhibitor Switch Description and Operation
Description
Inhibiter Switch contains two contact points. One of these
points connects the engine startup when the lever is in the N or P
position and turns on the reverse lights. The other contact point
monitors the lever's position (PRND) and is used to control gear setting
signals. ...
