Hyundai Tucson: Hydraulic System / Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Automatic Transaxle System / Hydraulic System / Description and Operation

Description

The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves).

The oil pump is powered by the engine. ATF passes through the oil filter and gets distributed along the oil channels. The oil becomes highly pressurized as it exits the oil pump and passes through the line pressure valve before being fed to the clutch & brake control valve, clutch, and brakes. TCM controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.

Hydraulic System

...

Components and Components Location

Components Location 1. Automatic transaxle2. Valve body assembly3. Oil pump assembly ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Canister Close Valve (CCV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specification. Specification: Refer to "Specification" 5. Disconnect the vapor hose connected with ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: AWD LOCK indicator (if equipped)
The AWD LOCK indicator light is illuminated when the AWD LOCK button is pushed. The purpose of this AWD LOCK mode is to increase the drive power when driving on wet pavement, snow-covered roads and/or off-road.The AWD LOCK indicator light is turned off by pushing the button again. CAUTION ...