Hyundai Tucson: Immobilizer System / Antenna Coil Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Body Electrical System / Immobilizer System / Antenna Coil Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

Remove the steering column upper and lower shrouds (A).

[LHD]

[RHD]

Take care not to damage and scratch the shrouds and its related parts.

Take care not to damage the hook when removing the upper and lower shrouds.

3.	Disconnect the 6P connector (B) of the coil antenna and then remove the coil antenna (A) after loosening the screw.

Installation

1.	Install the coil antenna and connect the 6P connector.

2.	Install the steering column upper and lower shrouds.

Immobilizer Control Unit Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") 3. Remove the steering column assembly. (Refer to the ...

Troubleshooting

Diagnosis Of Immobilizer Faults - Communication between the ECM and the SMARTRA. - Function of the SMARTRA and the transponder. - Data (stored in the ECM related to the immobilizer func ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Exhaust Manifold Components and Components Location
Components 1. Heat protector2. Exhaust manifold gasket3. Exhaust manifold4. Exhaust manifold stay ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Knock Sensor (KS) Description and Operation
Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. When knocking occurs, the vibration from the cylinder block is applied as pressure to the piez ...