Hyundai Tucson: Gauges / Engine Coolant Temperature Gauge

This gauge indicates the temperature of the engine coolant when the ignition switch or Engine Start/Stop button is ON.

CAUTION

If the gauge pointer moves beyond the normal range area toward the "H" position, it indicates overheating that may damage the engine. Do not continue driving with an overheated engine.

WARNING

Never remove the radiator cap when the engine is hot. The engine coolant is under pressure and could severely burn. Wait until the engine is cool before adding coolant to the reservoir.

Tachometer
The tachometer indicates the approximate number of engine revolutions per minute (rpm). Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the en ...

Fuel Gauge
This gauge indicates the approximate amount of fuel remaining in the fuel tank. ✽ NOTICE The fuel tank capacity is given in chapter 8. The fuel gauge is supplemented by a low fuel warning ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Specification: Refer to “Specification” ETC Motor 1. Turn the ignition switch OFF. 2. Disco ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Immobilizer indicator (if equipped)
Without smart key system This indicator illuminates when the immobilizer key is inserted and turned to the ON position to start the engine. At this time, you can start the engine. The indicator goes out after the engine is running. If this indicator blinks when the ignition switch is in the ...

© 2010-2020 www.htmanual.net