Hyundai Tucson: ESC(Electronic stability system) System / ESC OFF Switch Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Brake System / ESC(Electronic stability system) System / ESC OFF Switch Repair procedures

Inspection

1.	Turn ignition switch OFF and disconnect the negative (-) battery cable.

2.	Remove the crash pad side switch assembly. (Refer to Body - "Crash Pad")

3.	Check the continuity between the switch terminals as the ESC OFF switch is engaged.

ESC OFF Switch Description and Operation

Description 1. The ESC OFF switch is for the user to turn off the ESC system. 2. The ESC OFF lamp is on when ESC OFF switch is engaged. ...

DBC Switch Description and Operation

Description The DBC function is the acronym word of Downhill Brake Control function. When a vehicle goes down the hill, just pushing the DBC switch enables the car to keep its vehicle's speed a ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: USB Mode
✽ NOTICE - USING THE USB DEVICE Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the ignition is turned on.The USB device may not operate properly if the car ignition is turned on or off with the USB device connected ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
On-vehicle Inpection • First of all, check for DTCs. If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC. (Refer to DTC guide) • Check that the battery cables are connected to the correct termina ...