Hyundai Tucson: ESC(Electronic stability system) System / ESC OFF Switch Description and Operation
| Description |
| 1. |
The ESC OFF switch is for the user to turn off the ESC system. |
| 2. |
The ESC OFF lamp is on when ESC OFF switch is engaged. |
Yaw-rate and G Sensor Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console.
3.
Disconnect the yaw rate & lateral & Longitudinal G sensor connect ...
ESC OFF Switch Repair procedures
Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad side switch assembly.
(Refer to Body - "Crash Pad")
3.
Check the continuity b ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Anchor Pretensioner Description and Operation
Description
Anchor pretensioner operates as well as belt Pretensioner at
the same time If it gets into its deploy condition after a collision. It
is located at near anchor on front seat and it is an equipment to make
up for the existing short stroke. Anchor pretensioner is supported by
tw ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Engine Control Module (ECM) Schematic Diagrams
ECM Terminal And Input/Output signal [M/T]
ECM Terminal Function (M/T)
Connector [C200-MA]
Pin No.DescriptionConnected to1Injector (Cylinder #3) [High] control outputInjector (Cylinder #3)2Injector (Cylinder #4) [High] control outputInjector (Cylinder #4)3Injector (Cylinder #2) [Low] contro ...
