Hyundai Tucson: Engine Control System / Fuel Pressure Control Valve Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Pressure Control Valve Description and Operation

Description
Fuel Pressure Control Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine condition.

Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve terminals 1 and 2. Specification: Refer to "Specification" ...

Fuel Pressure Control Valve Specifications
Specification ItemSpecificationCoil Resistance (x)0.5 [20°C(68°F)  ...

Other information:

Hyundai Tucson (NX4) 2022-2023 Owner's Manual: Fuse Panel Description
Instrument panel fuse panel Inside the fuse panel cover, you can find the label describing fuse names and ratings. Information Not all fuse panel descriptions in this manual may be applicable to your vehicle. When you inspect the fuse panel on your vehicle, refer to the fuse panel ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Room Lamp Repair procedures
Inspection 1. Remove the room lamp assembly connector (A) then check for continuity between terminals. Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver.     Push the lens as shown arrow ...

© 2010-2023 www.htmanual.net