Hyundai Tucson: Engine Control System / Fuel Pressure Control Valve Specifications
| Specification |
| Item | Specification |
| Coil Resistance (x) | 0.5 [20°C(68°F) |
Fuel Pressure Control Valve Description and Operation
Description
Fuel Pressure Control Valve is installed on the high pressure
fuel pump and controls fuel flow flowing into the injectors in
accordance with the ECM signal calculated based on vario ...
Fuel Pressure Control Valve Troubleshooting
Signal Waveform
...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Intake Manifold Repair procedures
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
3.
Disconnect the wiring connectors and harness clamps, and then remove the wiring and protectors from the intake m ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Panoramaroof Motor Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the roof trim.
(Refer to the BD group - "Roof trim")
3.
Remove the panoramaroof motor (A) after disconnecting the connector (10 Pin).
4.
Ground the terminals as below table, and check that the panoramaroof unit o ...
