Hyundai Tucson: Body Electrical System / Ignition Switch Assembly

Start/Stop Button Repair procedures

Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the left air vent. (Refer to the BD group - "Crash pad") 3. Disconnect the connector (A). [LHD] [RHD] 4. Remove th ...

Repair procedures

Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3. If continu ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway. To turn the hazard warni ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Rail Pressure Sensor (RPS) Description and Operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM can control co ...