Hyundai Tucson: Engine Control System / Injector Specifications
| Specification |
| Item | Specification |
| Coil Resistance (x) | 1.5 [20°C(68°F)] |
Injector Description and Operation
Description
The GDI injector is similar to a standard injector, but
sprays fuel at a much higher pressure directly into the combustion
chamber and has a swirl disc to get the fuel swirling as i ...
Injector Troubleshooting
Signal Waveform
The three waveforms below are taken from the #1 and #4
injectors. The top waveform is from the high side (feed side) of the #1
and #4 injectors, while the middle waveform is fro ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Water Temperature Control Assembly Repair procedures
Removal and Installation
1.
Drain engine coolant so its level is below water temperature control assembly.
2.
Remove the air cleaner assembly.
(Refer to Engine transaxle assembly in this group)
3.
Disconnect the radiator upper hose (A).
4.
Disconnect the heater hose (A).
...
Hyundai Tucson (LM) 2010-2015 Service Manual: Heated Steering wheel Repair procedures
Repair Procedures
1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance(Black / Yellow, Black) - 9.0 kx ~ kx (25°C)
B.
Heated pad resistance (Yellow, Black) - 1.4 ~ 1.8 x ± 10%
2.
Measure a temperature.
A.
The temperature of wheel surface grip must rise from -20°C t ...