

1. Using a flat-blade screwdriver, gently pry the lens from the interior lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Align the lens tabs with the interior lamp housing notches and snap the lens into place.
WARNING
Use care not to dirty or damage lenses, lens tabs, and plastic housings.
License plate light bulb replacement
Appearance careHyundai Tucson (LM) 2010-2015 Service Manual: Fuel Filler Cap Description and Operation
Description
A ratchet tightening device on the threaded fuel filler cap
reduces the chances of incorrect installation, which seals the fuel
filler. After the gasket on the fuel filler cap and the filler neck
flange contact each other, the ratchet produces a loud clicking noise
indicating ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Hazard warning flasher
The Hazard Warning Flasher should be used whenever you find it necessary to stop
the car in a hazardous location. When you must make such an emergency stop, always
pull off the road as far as possible.
The hazard warning lights are turned on and off by pushing in the hazard switch.
This c ...