Hyundai Tucson: If you have a flat tire / Jack and tools
➀ Jack handle
➁ Jack
➂ Wheel lug nut wrench
The jack, jack handle, and wheel lug nut wrench are stored in the luggage compartment under the luggage box cover.
The jack is provided for emergency tire changing only.
Remove the luggage floor support (1) by pulling it out. Turn the winged hold down bolt (2) counterclockwise to remove the spare tire.
Store the spare tire in the same compartment by turning the winged hold down bolt (2) clockwise. Insert the lock (1) in to secure the tire in place.
To prevent the spare tire and tools from “rattling,” store them in their proper location.
If you have a flat tire
WARNING
Changing a tire can be dangerous. Follow the instructions in this section
when changing a tire to reduce the risk of serious injury or death. ...
Changing tires
WARNING
A vehicle can slip or roll off of a jack causing serious injury or death to
you or those nearby. Take the following safety precautions:
NEVER place any portion of your body under a vehi ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Oil level sensor Repair procedures
Removal and Installation
[For Europe]
When the oil sensor signal fault occurs, refer to the DTC guide.
1.
Drain the engine oil.
2.
Remove the oil level sensor (A) after disconnecting the oil level sensor connector.
Tightening torque:
8.8 ~ 9.8N.m (0.9 ~ 1.0kgf.m, 6.5 ~ 7.2lb-ft)
...
Hyundai Tucson (LM) 2010-2015 Service Manual: Master Cylinder Repair procedures
Removal
1.
Turm ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the battery positive terminal and them remove the battery.
3.
Disconnect the ECM connector and the ECM and battery tray.
4.
Disconnect the brake fluid level switch connector (A), and remo ...
