Hyundai Tucson: Operating door locks from outside the vehicle / Mechanical key

Turn the key toward the rear of the vehicle to unlock and toward the front of the vehicle to lock.

If you lock the door with a key, all vehicle doors will lock automatically. From the driver’s door, turn the key to the right once to unlock the driver’s door and once more within 4 seconds to unlock all doors.

Once the doors are unlocked, they may be opened by pulling the door handle.

When closing the door, push the door by hand. Make sure that doors are closed securely.

✽ NOTICE

You can change the system to the central door unlock mode (unlock all doors by turning the key to the right once). If you want this feature, perform the following:

Unlock mode conversion (two stage unlock mode ↔ central door unlock mode)

The unlock mode changes alternately by pressing the lock button and unlock button on the remote key (or smart key) at the same time for 4 seconds or more. The hazard warning lights will blink four times to indicate that the mode conversion is completed.

Operating door locks from outside the vehicle
...

Remote key
To lock the doors, press the Door Lock button (1) on the remote key. Press the Door Unlock button (2) on the remote key, the driver’s door will unlock. If you press the Door Unlock button on ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Clutch Master Cylinder Components and Components Location
Components 1. Reverse hose2. Master cylinder3. Siller4. Member assembly5. Turn over spring6. Clutch switch7. Clutch arm8. Pedal pad9. Ignition lock switch10. Stopper ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Steering Angle Sensor Description and Operation
Description The Steering Angle Sensor (SAS) is installed in EPS (Electric Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning direction and speed of the steering wheel. The HECU uses the signals from the SAS when performing ESP- ...

© 2010-2026 www.htmanual.net