Hyundai Tucson: Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Schematic Diagrams

Hyundai Tucson (LM) 2010-2015 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Schematic Diagrams

Circuit Diagram

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Specifications Direct control VFS[OD/C] x Control type : Normal high type Control Pressure kpa (kgf/cmx, psi) 500.14 ~ 9.81(5.1 ~ 0.1, 72.54 ~ 1.42)Current value(mA)50 ~ 850 Internal resi ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Intake Actuator Description and Operation
Description 1. The intake actuator is located at the blower unit. 2. It regulates the intake door by signal from control unit. 3. Pressing the intake selection switch will shift between recirculation and fresh air modes. ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Clutch Pedal Repair procedures
Inspection Clutch Pedal Inspection 1. Measure the clutch pedal height (from the face of the pedal pad to the floor board) and the clutch pedal clevis pin play (measured at the face of the pedal pad.) Standard value Stroke (A): 150 ± 3 mm (5.9055 ± 0.118 in.) Free play (B): 6 ~ 13 m ...

© 2010-2025 www.htmanual.net