Hyundai Tucson: Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve Repair procedures

Removal
1.
Disconnect the vapor hose (A).
2.
Remove the PCV valve (B).

Inspection
1.
Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.

   
If the plunger does not move (PCV valve is clogged), clean or replace the valve.
Installation
1.
Install in the reverse order of removal.

PCV Valve installation:
1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft)

Positive Crankcase Ventilation (PCV) Valve Description and Operation
Operation Principle ...

Evaporative Emission Control System
...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Brake Booster Repair procedures
Brake Booster Operating Test For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depresses fully the first time but gradually becomes higher when depressed succeeding times, the booster ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Rear Bumper Components and Components Location
Components 1. Rear bumper assembly2. Rear bumper mounting bracket ...

© 2010-2024 www.htmanual.net