Hyundai Tucson: Emission Control System
- General Information
- Description and Operation
- Specifications
- Troubleshooting
- Schematic Diagrams
- Components and Components Location
- Crankcase Emission Control System
- Schematic Diagrams
- Repair procedures
- Positive Crankcase Ventilation (PCV) Valve Description and Operation
- Positive Crankcase Ventilation (PCV) Valve Repair procedures
- Evaporative Emission Control System
- Description and Operation
- Schematic Diagrams
- Components and Components Location
- Repair procedures
- Canister Repair procedures
- Fuel Filler Cap Description and Operation
- Fuel Tank Air Filter Repair procedures
- Exhaust Emission Control System
Cruise Control Switch Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
3.
Remove th ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Purge Control Solenoid Valve (PCSV) Description and Operation
Description
Purge Control Solenoid Valve (PCSV) is installed on the surge
tank and controls the passage between the canister and the intake
manifold. It is a solenoid valve and is open when the ECM grounds the
valve control line. When the passage is open (PCSV ON), fuel vapor
stored in th ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Knock Sensor (KS) Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the intake manifold.
(Refer to Engine Mechanical System - “Intake And Exhaust System”)
3.
Disconnect the knock sensor connector (A).
4.
Remove the installation bolt (B), and then r ...
