Hyundai Tucson: Exhaust Emission Control System / Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Emission Control System / Exhaust Emission Control System / Description and Operation

Description

Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components.

Modifications to the combustion chamber, intake manifold, camshaft and ignition system form the basic control system.

These items have been integrated into a highly effective system which controls exhaust emissions while maintaining good drivability and fuel economy.

Exhaust Emission Control System

...

Catalytic Converter Description and Operation

Description The catalytic converter of the gasoline engine is a three way catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from the oxides of nitrogen (NOx). ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Shift Lever Repair procedures
Removal 1. Remove the center console. (Refer to "Console" in BD group) 2. Remove the snap pin (A) and the clip (B). 3. Remove the clip (A) and then remove the shift cable assembly. 4. Remove the shift lever assembly (A). Tightening torque: 8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Body Control Module (BCM) Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the center facia panel. (Refer to BD group - "Crash pad center panel") 3. Loosen the nut and bolt from BCM. 4. Disconnect the connectors (A). Installation 1. Install the BCM and connect the connectors. 2. In ...