What is Bluetooth® Wireless Technology?
Bluetooth® Wireless Technology allows devices to be connected in a short distance, including hands-free devices, stereo headsets, wireless remote controllers, etc. For more information, visit the Bluetooth® Wireless Technology website at www.Bluetooth.com
Before using Bluetooth® Wireless Technology audio features
WARNING
Driving while distracted can result in a loss of vehicle control that may lead to an accident, severe personal injury, and death.The driver’s primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle systems which take the driver’s eyes, attention and focus away from the safe operation of a vehicle or which are not permissible by law should never be used during operation of the vehicle.
Bluetooth® Wireless Technology audio can be used only when the
[Audio Streaming] of Phone is turned
.
❈ Setting Bluetooth® Wireless Technology Audio Streaming : Press
the
key
Select [Phone] through the tune knob
or
key
Select [Audio Streaming] through the
TUNE knob
Set

Starting Bluetooth® Wireless Technology Audio
key to change the mode in order of CD ➟ USB ➟ AUX ➟ My Music ➟ BT Audio.❈ Audio may not automatically start playing in some mobile phones.
Using the Bluetooth® Wireless Technology audio features
Play / Stop
Press the
TUNE knob to play and pause the current song.

❈ The play / pause functions may not be supported in some mobile phones.
MENU : My Music Mode
PhoneHyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
Inspection
Manual Transaxle Oil Inspection
1.
Park the vehicle on a level ground and stop the engine.
2.
Retighten the oil filler plug (A) with a new washer.
3.
Check level with finger.
Oil level must be up to fill the hole, if not, add oil until it runs over.
...
Hyundai Tucson (LM) 2010-2015 Service Manual: PDM Relay Box Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front seat heater switch.
(Refer to BE group - "Seat heater switch")
3.
Remove the PDM relay box (A) after loosening the screws (2EA) and desconnecting the connector.
IG2 Relay
Check for continuity between th ...