Hyundai Tucson: CD Player : AC110TMKN, AC1B0TMKN, AC1B1TMAN / Phone
Before using the Bluetooth® Wireless Technology phone features
- In order to use Bluetooth® Wireless Technology phone, you must first pair and connect the Bluetooth® Wireless Technology mobile phone.
- If the mobile phone is not paired or connected, it is not possible to enter Phone mode. Once a phone is paired or connected, the guidance screen will be displayed.
- If Priority is set upon vehicle ignition (IGN/ACC ON), the Bluetooth® Wireless Technology phone will be automatically connected. Even if you are outside, the Bluetooth® Wireless Technology phone will be automatically connected once you are in the vicinity of the vehicle. If you do not want automatic Bluetooth® Wireless Technology phone connection, set the Bluetooth® Wireless Technology power to OFF.
- Making a call using the Steering wheel remote controller
- Pairing a Bluetooth® Wireless Technology Device
- Pairing through [PHONE] Setup
- Connecting a Device
- Changing Priority
- Disconnecting a Device
- Deleting a Device
Bluetooth® Wireless Technology AUDIO
What is Bluetooth® Wireless Technology?
Bluetooth® Wireless Technology allows devices to be connected
in a short distance, including hands-free devices, stereo headsets, wireless remote
control ...
Making a call using the Steering wheel remote controller
1)
button : Activates voice recognition.
2) button
: Places and transfers calls.
3) button
: Ends calls or cancels functions.
Check call history and making call
➀ Shortly press ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
Inspection
Manual Transaxle Oil Inspection
1.
Park the vehicle on a level ground and stop the engine.
2.
Retighten the oil filler plug (A) with a new washer.
3.
Check level with finger.
Oil level must be up to fill the hole, if not, add oil until it runs over.
...
Hyundai Tucson (LM) 2010-2015 Service Manual: Alternator Schematic Diagrams
Circuit Diagram
•
COM signal - When
controlling the voltage generated, the ECM sends the target voltage data
to the alternator via a PWM signal.(High voltage: 4V or higher, low
voltage: 2V or lower)
•
FR signal - The
transistor activation signal inside t ...