| Schematic Diagram |

Repair proceduresHyundai Tucson (LM) 2010-2015 Service Manual: Oil level sensor Repair procedures
Removal and Installation
[For Europe]
When the oil sensor signal fault occurs, refer to the DTC guide.
1.
Drain the engine oil.
2.
Remove the oil level sensor (A) after disconnecting the oil level sensor connector.
Tightening torque:
8.8 ~ 9.8N.m (0.9 ~ 1.0kgf.m, 6.5 ~ 7.2lb-ft)
...
Hyundai Tucson (LM) 2010-2015 Service Manual: Front Impact Sensor (FIS) Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/ procedures described previously.
•
Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
•
Do not turn the ignition switch ON and ...