Hyundai Tucson: Coupling Assembly / Pressure Sensor Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / 4 Wheel Drive (4WD) System / Coupling Assembly / Pressure Sensor Description and Operation

Description

The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into rear wheels. Its torque value varies according to a pressure status.

Oil hydraulic Motor(Actuator) Repair procedures

Inspection If you have trouble code related to the oil hydraulic motor (actuator), check oil hydraulic motor (actuator) according to the inspection process. Oil Hydra ...

Pressure Sensor Schematic Diagrams

Circuit Diagram ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Yaw-rate and G Sensor Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the floor console. 3. Disconnect the yaw rate & lateral & Longitudinal G sensor connector (A). 4. Remove the mounting bolts (B). Tightening torque: 7.9 ~ 10.8 N.m (0.8 ~ 1.1 kgf.m ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Propeller Shaft Repair procedures
Removal 1. After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts (A). Tightening torque: 49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.1 ~ 50.6 lb-ft) 2. Remove the center bearing bracket (A) mounting bolts (B-2ea). Tightening to ...