Hyundai Tucson: Automatic Transaxle Control System / Shift Lever Components and Components Location

Inhibitor Switch Repair procedures

Inspection     • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Inspection flow Items to ch ...

Shift Lever Repair procedures

Removal 1. Pull the knob (A) in the direction of "F" and remove it, and then remove the console upper cover. 2. Remove the console. (Refer to Body - "Floor console") 3. Disconnect the con ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Rear Lower Arm Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bolts when removing the rear wheel & tire. 2. Loosen the nut and then remove the rear stabilizer li ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
Compression Pressure Inspection     If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. 1. Warm up and stop engine. Allow the engine to warm up to normal operating temperature. 2. Disconnect the injector exten ...